Valve test benches


Valve test benches can be used for various applications: the incoming goods test when new valves are delivered, the intermediate and final inspection during/after valve manufacture, checking the valve repair result or routine testing of, for example, safety valves.

Testion operation.

The tests comprise mainly pressure tests of valve housings, leakage tests of the valve seats and testing of the set pressure of safety valves.


A valve test bench consists of a clamping unit and a control panel for operation, measurement, and control. The test piece is held securely by the clamping device and sealed on inlet and outlet for the test. Clamping forces up to about 1500t can be implemented (on request even higher).

Technical specifications.

Please check technical specifications below.

More models and available accessories

Mobile Test Benches

TypeDNClamping Force (t)
PS-T/SVS10-80 (3/8"-3")5
PS-T10.0310-200 (3/8"-3")10
PS-15M150-250 (1/2"-10")15
PS-SV15M150-250 (1/2"-10")15
PS-10050-500 (2"-20")100
PS-15050-500 (2"-20")150

Stationary Test Benches

TypeDNClamping force (t)
PS-H200M50-600 / 100-1000 (2"-24"/4"-40")200
PS-H250M50-600 / 100-1000 (2"-24"/4"-40")250
PS-H300M50-600 / 100-1000 (2"-24"/4"-40")300
PS-H350M50-600 / 100-1000 (2"-24"/4"-40")350
PS-H400M50-600 / 100-1000 (2"-24"/4"-40")400
PS-H450M50-600 / 100-1000 (2"-24"/4"-40")450
PS-H500M50-600 / 100-1000 (2"-24"/4"-40")500
PS-H550M50-600 / 100-1000 (2"-24"/4"-40")550

This product is available for: rent on-site service sale

Request information

Valve test benches
Find out more